Forklift Operator Training – Safety tips for Forklift Operators

Forklift Operator Training

Do you know if you are eager to pursue your career as a forklift operator you can make £35,000 and up annually. Generally as a forklift operator you are required to handle tasks like loading and unloading equipment from various deliveries, stockpiling goods in places that can’t be reached, for example warehouses and making pallets of goods to complete an order. Forklifts can look like scary complicated vehicles but with a good training and safety measures, qualified and trained drivers can handle them quite easily.

With a professional forklift operator training given at valuable training schools like the new wave training school you reduce or to say it quite legitimately wipe out your odds of getting into a life threatening accident while operating a forklift. To help ensure your safety with forklifts here are some things you should take into account.

Before operation

Before getting work started with the forklift for the day, you must make sure that everything is in order and safe to go. You must wear correct clothing for the job. Hard hat, high visibility jacket and proper shoes are mandatory for operation. All professionals are required to take routine precautions before operating a forklift. Some of the things you need to do are:

  • Check the forklift for any dents and damage
  • Look underneath for any fuel, water or oil leaks
  • Inspect the tyres
  • Check the gas
  • Check the battery
  • Check for a clean engine bay
  • Check the load plate
  • Check the controllers
  • Check the lights
  • Check the tines

Starting work

If you find anything suspicious or unsafe in the forklift, inform the management immediately so that it gets taken care of. After your daily routine of inspecting the forklift is over and you are OK to go, you can start off with work taking care of a few things.

  • Make sure you enter the cabin safely. You could always miss a step if you are distracted with something else. Same goes for exiting the cabin. Always watch your step
  • Always abide by the rules and regulations of the work site. They are set to keep you and your fellow colleagues safe.
  • Make sure your hands and shoes are clean and grease free. Slippery hands and shoes can cause many accidents.
  • Wear your seatbelt.
  • Never leave your forklift unattended with the power turned on.
  • Check if your horn, indicators and all the lights are in working condition.

Safety measures while driving

After your safety checklist is complete, it’s time for you to buckle up and start driving. Stay extra focused on what you do from now onward. Always remember that many other people share the workplace with you. Their safety and your own safety should be your number one priority. Here are some tips that will help you in driving safely in your surrounding environment.

  • First of all look up and observe all that’s going on around you. Make sure that your designated pathway is clear of all the obstacles. You need to set the route to your destination in your head first.
  • Keep an eye on all the signs and hazards around you. For example bumpy surfaces, wet areas and sharp turns.
  • While driving always follow the speed limits. Never over-speed the forklift. Do not make sharp turns while speeding.
  • Always keep an eye on the pedestrians. Let your presence be known to them by using you horn at intersections, corners and entrances.
  • Do not apply sudden breaks or make unforeseen stops.

While carrying a load

This is the part where you need to be the most careful while operating a forklift. Before everything you need to assess the load that you are carrying. Check the weight and the size of it. There are other safety measures you need to follow.

  • Always keep the forks 4 to 6 inches above the ground while driving without a load.
  • Never over load the forklift. Check the capacity of the weight you can carry.
  • Always carry the load low and tilted back to avoid a tip over.
  • Spread the forks widely in order to balance the load properly.
  • Keep the heavier end close to you if the load is unbalanced.
  • If your vision is not clear because of the load you are carrying, travel in reverse.
  • Never raise the load while you are moving.
  • Always look in the direction of the travel.
  • If you need to raise the load while unloading, make sure the path is clear.
  • While unloading, tilt the load forward and slowly lower it.
  • Always sound the alarm and back up slowly.

If you follow these tips and tricks, you’ll be more efficient and stay safe from any regrettable events. If you are looking for a forklift operator training course, there are reputable forklift operator training schools in London.

top
Get a Quick Quote
X

Get a Quick Quote

Fill in the form below for a quick quote and to find out if you qualify for the 0% Course Finance option.